We're so happy to have Katherine from
Sew Me Something Good take the Kona Club Challenge this month. We met Katherine on
Blogathon Canada last year. Katherine does beautiful work and is a ninja at coming up with patterns and tutorials!
Katherine used the colors we sent out in September 2014 for
Kona Club and made this gorgeous placemat! We hope you enjoy this tutorial and make one of your own. We are giving away the fat quarters that Katherine used in this tutorial so be sure to leave a comment on this post to win!
Twigs - Placemat
Hello and welcome! My name is Katherine and
Sew Me Something Good, is the name of the blog where I share my love of fabric and my sewing and creative adventures. I'm delighted to be sharing a simple design for a placemat using some gorgeous Kona cottons from Sew Sisters. Thanks, Judy and Carol for inviting me!
For my Kona Challenge design, I found inspiration in Nature (our trees are bare, waiting for winter), and knew this would be a chance to step outside my usual choice of bright colours, to work with a more neutral palette. I chose the Kona Club bundle from Sept. 2014 and couldn't resist adding another Kona colour...
Coffee to the mix to make my "Twigs" placemat.
Please read through all directions in the tutorial before beginning.
All seams are a scant 1/4" - unless otherwise instructed.
The placemat will finish at 12.75" x 18.25" approximately.
Materials:
- 4 Fat quarters (18" x 21") for the placemat front - from the remainders, I cut binding
- 1 Fat quarter (18" x 21") for the placemat back
- 17" x 20" quilt batting
- Thread for piecing and quilting
- Double fold binding tool
- Rotary cutter and mat
- Ruler
- Iron
- Marking tool
Cut List:
- From each of the 4 Fat Quarters (Cappuccino, Raffia, Mushroom & Straw) for the front:
- Cut 2 squares 5" x 5"
- Cut 1 strip 2" x 12.5"
- From the Cappuccino FQ:
- Cut 1 rectangle 6.5" x 12.5"
- From the Mushroom FQ:
- Cut 4 strips 2" x 21" for making double fold binding
Leave the backing FQ (
Coffee) uncut. The full size will be used for quilting and then cut down afterwards.
Instructions:
1. Pair up the 5" x 5" squares as follows
(shown in photo below)...
then,
stack the lighter fabric on top of the darker, keeping all of their edges aligned.
- Cappuccino + Raffia
- Cappuccino + Straw
- Mushroom + Raffia
- Mushroom + Straw
 |
| Each pair of squares will be completely aligned on top of each other before stitching. |
How to make 8 half square triangle units (HST), from 2 squares of fabric:
2. Using your marking tool and ruler, mark diagonal lines across the lighter fabric in each of the 5" x 5" pairs. These lines will be your cutting lines
(not to be cut until AFTER all the stitch lines have been sewn).
Next, mark stitch lines 1/4" away from the cutting lines you just made. Be sure to make stitch lines parallel to both lines and on both sides of each cut line (see photo below).
3. Keeping the pair of squares perfectly aligned with one another, sew just to the inside of the two stitch lines in each direction on the diagonal, made in step #2 (this will give you a scant 1/4" seam for each of your HST units and allow for blocks to be trimmed).
Sew all the pairs of squares this way (chain piecing makes it more efficient). After all the squares have been stitched, you are ready to cut! Cut along the initial cut lines you marked in step # 2 and then you will sub-cut the pieces further (one horizontal cut and one vertical - as shown below), making 8 HST units.
4. Press all the HST units with the seam towards the darkest fabric in the unit. Then you trim each of the HST units to a finished size of 2" x 2".
Sewing the placemat front together:
5. Arrange from left to right
(paying attention to colour placement and angle of the HST units):
6.5" x 12.5" rectangle (Cappuccino); 8 HST units (Cappuccino + Raffia); 2" strip (Raffia); 8 HST units (Raffia + Mushroom); 2"
strip (Mushroom); 8 HST units (Mushroom + Straw); 2" strip (Straw); 8 HST units (Straw + Cappuccino); 2" strip (Cappuccino).
6. Sew the HST units together to form a vertical strip - before continuing to sew the un-pieced strips next to them.
Basting:
7. Lay the remaining fat quarter, (for the backing -
Coffee), down on a flat surface and secure it in place (I use painter's tape); lay the batting next and finally the placemat front (right side up) on top - for basting. Baste using your preferred method.
I used basting spray to secure the layers for quilting.
Quilt as desired.
8. After quilting is complete, baste a scant 1/8" in from the edge of the placemat's front around the perimeter (to secure all layers).
9. Using a quilting ruler, rotary mat and cutter, trim 1/4"
away from the edge all the way around the placemat (placemat is right side up). The batting and backing fabric will extend 1/4" larger than the placemat front - shown below.
Binding:
I personally prefer binding placemats and items that will be laundered regularly with double fold binding. To eliminate bulk, I join all my binding strips using a 45 degree angle cut. Here's how the strips for binding will look before they are sewn together using a 1/4"
seam.
10. Sew the four binding strips together to make a continuous length. Press each seam open and trim the points.
To make double fold binding from these strips, I use a binding tool (shown below), but you could also make the binding without one. Using the tool, the strips will be pressed with raw edges to the middle and then pressed again along the middle line (making the 2" strip into 1/2" double fold binding).
Attaching Binding to Placemat:
11. Open up the binding and place right side of binding onto right side of the back of the placemat. Leave a tail of binding about 4"
in length from where you start to sew (about the middle of the bottom edge of the perimeter of the placemat). The raw edge of the binding and raw edge of the placemat will be lined up. Stitch to the right of the first fold in the binding (so your seam will be a scant 1/2" seam).
As you approach a corner of the placemat, mark the binding with a pin, to show where you will stop stitching; 1/2" from the corner. Back stitch to secure.
To make a mitred corner, fold the binding away from the corner of the placemat, at a 45 degree angle.
Then, fold the binding back, even with the raw edge on the placemat.
Sew a scant 1/2" seam, starting at the folded edge and back stitch to secure before continuing up the raw edge. Repeat this process for the next 3 corners.
After the fourth corner, place the rest of the binding along the bottom raw edges, overlapping it with the beginning of the binding. Mark the placement of where the binding overlaps - this will become your seam line for joining the beginning and ending of the binding strips. Measure and mark 1/4" from the first line, to give you a cutting line.
Cut on the cut line and then join the beginning edge of the binding with the end, using a 1/4" seam (which is also a 45 degree angle). Press seam open and trim the points off.
Return to stitching the binding to the placemat until you reach the start of this seam.
12. Flip the placemat over, so that the front is now right side up. Wrap the binding to the front, over the raw edges of the placemat
(it will cover the previous seam line along the edges). Pin or use wonder clips to hold the binding in place for stitching. Corners are folded to make mitres in the binding.
Stitch the binding down, close to the edge
(pivot at the
corners) around all four sides of the placemat and
back stitch to secure when you return to your starting point.
Finished!
I hope you enjoy your new, modern looking placemat!
You will have leftover fabric from making one placemat, so why not grab some extra fat quarters for backing and make a set? They would make a great gift. ;o)
Thanks so much Sew Sisters! I loved having a chance to design and sew something for the
Kona Club Challenge.
Giveaway!
You could win 4 fat quarters of the
Kona Cotton Solids Katherine used to make her Twigs Placemat!
Just leave a comment on this post for a chance to win.
If you are no-reply/Wordpress blogger please leave your email id in the post.
We will leave the giveaway open till Monday, November 3.
Winner will be announced Tuesday, November 4.
Good luck everybody and enjoy making your very own Twigs Placemat!
Many thanks to Katherine from
Sew Me Something Good for this awesome tutorial.
Click here for more details on
Kona Club.
